Setting The Alarm Clock; Using Several Handsets; Registering Handsets - Siemens Gigaset C380 User Manual

Setting the alarm clock

Setting the alarm clock
Precondition: The date and time have
already been set (¢ page 13).
Activating/deactivating the alarm
clock
¤ Alarm Clock ¤ Activation (‰ = on)
§Menu§
After you activate the alarm clock, the menu
for setting the wake-up time opens auto-
matically (¢ page 42).
If the alarm clock is set, the wake-up time
appears with the ¼ icon in the display
instead of the date.
Setting the wake-up time
¤ Alarm Clock ¤ Wake up time
§Menu§
~
Enter the wake-up time in hours
and minutes, then press
When the alarm clock rings...
Alarm repeat after 5 minutes
§Snooze§
Press the display key or any key.
§Snooze§
If you press three times, the alarm
clock switches off for 24 hours.
Turning off the alarm clock for 24
hours
§Off§
Press the display key.
42

Using several handsets

Registering handsets

You can register up to four handsets on your
base station.
Please
Each additional handset must be regis-
tered on the base station in order for it to
work properly!
For how to register your handset automati-
cally, ¢ page 11.
If automatic registration does not work, you
will have to register the handset manually.
Manual registration of
Gigaset C38H to Gigaset C380/
§OK§
.
C385
You must activate manual registration of the
handset on both the handset (1) and the
base station (2).
Once it has been registered, the handset
returns to idle status. The handset's internal
number is shown in the display, e.g. INT 1. If
it does not appear, repeat the procedure.
.
1) On the handset
¤ Settings ¤ Handset
§Menu§
¤ Register Handset
~
2) On the base station
Within 60 sec., press and hold the registra-
tion/paging key on the base
station(¢ page 2) (approx. 3 sec.).
Enter the system PIN of the
base station (the default is
§OK§
0000) and press . Handset is
registering flashes on the dis-
play.