Sony Ericsson User Manual page 56

Note: These codes are supplied by your
network operator or service provider
if supported.
A Locks setting may appear in the Security submenu:
• To go to the Locks menu, scroll to WAP services/
Options/Common/Security/Locks.
Transaction contracts
You can check which transactions you have made with
your phone when browsing. A contract, which contains
details about the transaction, can be saved in
your phone.
• To check your contracts, scroll to WAP services/
Options/Common/Security/Contracts.
E-mail account settings
An e-mail account specifies, for example, the server
that is used for your e-mail messages.
To create an e-mail account
1. Scroll to Messages,
YES
2. Select Edit account,
YES
3. Select Add new?,
YES
56 Setting up WAP and e-mail
This is the Internet version of the user's guide. © Print only for private use.
, E-mail, , Options,
YES
.
.
4. Enter a name for the account, for example Home or
Office.
5. Select Connect using,
A list appears with the data accounts that you have
saved in your phone.
6. Select the data account you want to use with this
e-mail account,
7. Enter the rest of the settings in the list, some of which
are optional. To enter the settings, scroll to the setting,
press and enter the information. Press
YES
confirm. Repeat this for each required setting. You use
the same e-mail settings in your phone as in your PC
e-mail program. If you do not have an e-mail service,
contact your operator to get all the necessary settings.
• Protocol – select POP3 or IMAP4.
• Inc. server (Incoming server)– enter the name or IP
address of the service provider for incoming e-mail
messages. For example, mail.server.com or 10.1.1.1.
• Incoming port – if needed, change the number of the
port used by the protocol you are using.
• Mailbox – enter a user name for your e-mail account.
. • Password – enter a password for your e-mail account.
YES
• Outgoing server – enter the name or IP address of the
SMTP server to be able to send e-mail messages.
.
YES
.
YES
to
YES