Connecting Up; Pin-Outs Of Dc Output Connector; Before You Start - SoundCraft DPS-3 User Manual And Technical Manual

CONNECTING U U P

Before you start

Ensure the DPS-3 power supply is NOT connected to the Mains and is turned OFF.
The Power supply can be positioned anywhere within reach of the console and an available power socket, but is best rack-
mounted in a position where airflow through the vents is not obstructed and where the power switch or cables cannot be
accidentally knocked. Connect the multi-way power cable between the DPS-3 External Power Supply and the console's con-
nector. Screw the connector locking ring clockwise on both units to secure the cable. The locking ring should be firm, but
not tight. Connect an IEC type mains cable with the plug fused at 3 AMPS, to the mains input socket on the DPS-3. Connect
the other end to the nearest plug socket and switch on the power to the DPS-3.
PIN-O O UTS O O F D D C O O UTPUT C C ONNECTOR
8