Page 1
DPS-4 P DPS-4 P o o o o o w w w w w er Suppl DPS-4 P er Suppl er Suppl y y y y y er Suppl DPS-4 P DPS-4 P er Suppl User Manual DPS-4 Power Supply...
Page 2
Soundcraft shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual.
Page 5
Note: It is recommended that all maintenance and service on the product should be carried out by Soundcraft or its authorised agents. Soundcraft cannot accept any liability whatsoever for any loss or damage caused by service, maintenance or repair by unauthorised personnel.
Contain impor Contain impor tant infor mation and useful tips on the operation of your equipment. operation of your equipment. operation of your equipment. operation of your equipment. operation of your equipment. DPS-4 Power Supply...
Equipment has been properly installed in accordance with instructions contained in Soundcraft's manual; and b) the End User has notified Soundcraft or the Dealer within 14 days of the defect appearing; and c) no persons other than authorised representatives of Soundcraft or the Dealer have effected any replacement of parts maintenance adjust- ments or repairs to the Equipment;...
Screw the connector locking ring clockwise on both units to secure the cable. The locking ring should be firm, but not tight. Connect an IEC type mains cable with the plug fused at 13 AMPS, to the mains input socket on the DPS-4. Connect the other end to the nearest plug socket and switch on the power to the DPS-4.
Routine Maintenance Routine maintenance is limited to cleaning the cooling fan’s air filter which is located on the front panel. Ensure that the DPS-4 is switched off and unplugged before starting this procedure otherwise personal injury or damage to the fan blades may occur.