Connecting Up; Front Panel; Rear Panel - SoundCraft DPS-4 User Manual

Connecting Up

Before You Start
Ensure the DPS-4 power supply is NOT connected to the Mains and is turned OFF.
The Power supply can be positioned anywhere within reach of the console and an available power socket, but is best rackmounted
in a position where airflow through the vents is not obstructed and where the power switch or cables cannot be accidentally
knocked. Connect the multi-way power cable between the DPS-4 External Power Supply and the console's connector.
Screw the connector locking ring clockwise on both units to secure the cable. The locking ring should be firm, but not tight. Connect
an IEC type mains cable with the plug fused at 13 AMPS, to the mains input socket on the DPS-4. Connect the other end to the
nearest plug socket and switch on the power to the DPS-4.

Front Panel

Mains Switch and Status LEDs

Rear Panel

Mains Input
8 DPS-4 Power Supply