Panasonic LUMIX DMC-FX66 Operating Instructions Manual page 97

∫ About [ƒ] [1-area-focusing (High speed)]
•
You can focus on the subject more quickly than in other AF Modes.
•
The picture may stop moving for a moment before being brought into focus when you press the
shutter button halfway. This is not a malfunction.
∫ Setting up [ ] (AF Tracking)
1
Bring the subject to the AF tracking
frame, and press 4 to lock the subject.
A AF tracking frame (White)
B AF tracking frame (Yellow)
•
AF tracking frame will continuously focus on
the subject's movement once the subject is
recognised.
•
AF tracking is turned off when 4 is pressed
again.
2
Take the picture.
Note
•
Dynamic tracking function may fail to lock, lose the subject in AF tracking, or track different
subject depending on the recording conditions such as the ones below.
–
When the subject is too small
–
When the recording location is too dark or bright
–
When the subject is moving too fast
–
When the background has the same or similar colour to the subject
–
When jitter is occurring
–
When using the zoom
•
If it fails to lock, AF area will flash in red, and disappear. Press 4 again.
•
AF Tracking will not operate when the subject is not specified, the subject is lost, or has failed
to be tracked. The picture will be taken with [Ø] in [AF MODE] in that case.
•
[FACE RECOG.] does not work when AF tracking is active.
•
[QUICK AF] will not operate during AF tracking.
•
It is not possible to set [
[PIN HOLE], [FILM GRAIN] and [HIGH DYNAMIC] in Scene Mode.
•
It is not possible to set [
•
The focus range is 3 cm (0.10 feet) (Wide)/1 m (3.28 feet) (Tele) to ¶.
Advanced (Recording pictures)
] in [PANORAMA ASSIST], [STARRY SKY], [FIREWORKS],
] in [B/W], [SEPIA], [COOL], or [WARM] in [COLOR MODE].
- 97 -
Before locking
A
Locked
B