Panasonic LUMIX DMC-FX66 Operating Instructions Manual page 28

[VIERA Link]
•
This will work when the
•
Refer to P146 for details.
} [SCENE MENU]
[VERSION DISP.]
[FORMAT]
•
Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler
(optional) when formatting. Do not turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If you cannot format, contact the dealer or your nearest Service Centre.
Preparation
Setup so this unit can be controlled by the remote control of the
VIERA by automatically coupling this unit with the VIERA Link
compatible equipment using HDMI mini cable (optional).
[OFF]: Operation is performed with the buttons on this unit.
[ON]: Remote control operation of the VIERA Link
compatible equipment is enabled. (Not all operations
are possible)
Button operation of the main unit will be limited.
HDMI mini cable (optional)
Set the screen that will appear when a Scene Mode has been
selected.
[OFF]: The recording screen in the currently selected Scene
Mode appears.
[AUTO]: The [SCENE MODE] menu screen appears.
It is possible to check which version of firmware is on the camera.
The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
- 28 -
is connected.