Panasonic LUMIX DMC-FX66 Operating Instructions Manual page 25

q [ECONOMY]
•
Press the shutter button halfway or turn the camera off and on to cancel [SLEEP MODE].
•
[SLEEP MODE] is set to [5MIN.] in the Intelligent Auto Mode and the Clipboard Mode.
•
[SLEEP MODE] does not work in the following cases.
–
When using the AC adaptor
–
When connecting to a PC or a printer
–
When recording or playing back motion pictures
–
During a slide show
–
[AUTO DEMO]
•
The effect of the [LCD POWER SAVE] is lower in the Digital Zoom range compared to the
Optical Zoom range.
•
The effect of the [LCD POWER SAVE] will not affect the image being recorded.
•
Setting of [LCD MODE] has priority over the setting of [LCD POWER SAVE] regarding the
brightness of the LCD monitor.
o [AUTO REVIEW]
•
The Auto Review function is activated regardless of its setting when using Auto Bracket (P59),
[SELF PORTRAIT] (P63), [HI-SPEED BURST] (P69), [FLASH BURST]
[PHOTO FRAME] (P73)
with audio (P104).
•
In Intelligent Auto Mode, the Auto Review function is fixed to [2SEC.].
•
[AUTO REVIEW] does not work in Motion Picture Mode.
Preparation
You can conserve the battery life by setting these menus.
Also, the battery life is conserved by dimming the LCD monitor.
p [SLEEP MODE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[LCD POWER SAVE]:
Brightness of the LCD monitor is lowered. The battery life will be
conserved by lowering the image quality of the LCD monitor
further during the recording
¢ Excluding the Digital Zoom range.
[OFF]/[ON]
Set the length of time that the picture is displayed after taking it.
[OFF]
[1SEC.]
[2SEC.]
[HOLD]: The pictures are displayed until one any of the buttons
is pressed.
in Scene Mode, Burst Mode
- 25 -
¢
.
(P70)
(P100) and when recording still pictures
and