Panasonic LUMIX DMC-FX66 Operating Instructions Manual page 24

[LCD MODE]
•
The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear different from real life on the LCD monitor. However, this does not affect the
recorded pictures.
•
The LCD monitor automatically returns to normal brightness after 30 seconds when recording
in Power LCD Mode. Press any button to make the LCD monitor bright again.
•
If the screen is difficult to see because of bright light shining on it, use your hand or another
object to block the light.
•
The number of recordable pictures decreases in Auto Power LCD Mode and Power LCD Mode.
•
[AUTO POWER LCD] cannot be selected in Playback Mode.
[DISPLAY SIZE]
[GUIDE LINE]
•
The [PATTERN] setting is fixed to [
[HISTOGRAM]
Preparation
These menu settings make it easier to see the LCD monitor when
you are in bright places.
[OFF]
„ [AUTO POWER LCD]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
... [POWER LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
Change the display size of some icons and menu screens.
[STANDARD]/[LARGE]
Set the pattern of the guidelines displayed when taking pictures.
You can also set whether or not to have the recording information
displayed when the guidelines are displayed.
[REC. INFO.]:
[OFF]/[ON]
] in the Intelligent Auto Mode and the Clipboard Mode.
This allows you to set either to display or not display the
histogram. (P49)
[OFF]/[ON]
- 24 -
(P48)
[PATTERN]:
[ ]/[ ]