Project Configuration - SoundCraft DC 2020 User Manual

Project Configuration

The Project Configuration page appears as follows:
Project config
Memo
<Blank>
<Blank>
Elapsed Time 0:11:18:25
OK
The following information is presented:
Screen Title Area
The page title only.
Memo Fields
There are two fields which may be used for notes. Each field may contain up to 30
characters.
To change the contents of a field, you may touch the field: the alphanumeric keypad
will then be displayed.
Elapsed Time
This shows the time that has been spent on the Project in question. The fields show,
from left to right, Days: Hours: Mins: Secs. The example on the screen above
therefore shows 11 hours, 18 mins and 25 seconds. The elapsed time for the Project
in question is only incrementing when the Project is selected (via the Project page):
all other Projects, if there are any, are therefore not incrementing.
The time starts from zero when a Project is created (again, via the Project page).
Touch-pads
OK. This returns you to the Project page.
DC2020 The Automation Pages 4.91