Connections - Panasonic SC-HC3DB Operating Instructions Manual

Connections

Portable audio equipment
Portable audio player
Note
• Adjust the volume and sound quality of this unit and the other equipment. Reduce the level of input signal
(for example, by switching off the equalizer or reducing the volume) of the other equipment before connection.
High levels of input signal will distort the sound.
• For details, refer to the instruction manual of the other equipment.
2
DAB ANT
75Ω
FM ANT
1
Connect the FM indoor antenna.
1
Tape the antenna to a wall or column, in a position
with least amount of interference.
Connect the DAB "T" antenna.
2
The cross bar of the T should be kept firmly stretched.
Find a position with good reception.
There is a function on the unit to check signal quality.
Be sure to fully
tighten the screw.
For best reception
A DAB outdoor antenna is recommended (➡ page 5).
4
(Cords and equipment not included)
Plug type:
3.5 mm stereo
Ø
AUX
AC IN
3
Adhesive tape
FM indoor antenna
Adhesive tape
Start playback from
the portable audio
➡
source.
Headphones
(not included)
Reduce the volume level and
connect the headphones.
Plug type: Ø3.5 mm stereo.
Note
• Avoid listening for prolonged periods
of time to prevent hearing damage.
• Excessive sound pressure from
earphones and headphones can
cause hearing loss.
Connect the AC mains lead.
3
READ THE CAUTION FOR THE
AC MAINS LEAD ON PAGE 2
BEFORE CONNECTION.
Connect the AC mains lead after
all other connections are complete.
To household
AC mains socket
Note
To save power when the unit is not to be used for
a long time, unplug it from the household AC mains
socket. You will need to reset some memory items
after plugging in the unit.
Insertion of connector
Appliance inlet
Approx. 6 mm
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front
part of the connector may jut out as shown in
the drawing. However there is no problem using
the unit.
MAIN
REMOTE
UNIT
CONTROL
Connector