Panasonic SC-HC3DB Operating Instructions Manual page 19

Troubleshooting guide (continued)
iPod
iPod does not turn on.
No sound is coming from
the speakers.
Distorted sound or the
sound level is too low.
Cannot control the iPod
using remote control or
main unit.
iPod does not charge.
DAB
DAB reception is poor
DATA
SCRAMBLED
NO SERVICE
NO SIGNAL
SCAN FAILED
STATION FULL
• Verify that the iPod battery is not depleted before connecting it to the unit.
• Before inserting your iPod into the dock, turn off both the unit and iPod. Turn power
back on and select the appropriate source.
• The iPod is not correctly inserted into the dock. Turn off the iPod, remove it from the
dock connector. Reinsert it and turn it on again.
• Make sure that iPod is actually playing something.
• Adjust the volume.
• Make sure the equalizer function of your iPod is turned off.
• Make sure the iPod is inserted properly into the dock.
• Check the dock connection and make sure that iPod is selected as the source of
music. (➡ page 16)
• Check all connections. (➡ page 4, 16)
• Keep the antenna away from computers, televisions, other cables and cords.
• Use an outdoor antennas. (➡ page 5)
• Data broadcast being received over the DAB broadcast signal. Cannot be used on
this unit.
• The broadcast station being received cannot be accessed.
• The station is currently not broadcasting.
• This station cannot be received. Check your antenna. (➡ page 4, 5)
• Stations are not receivable. Check your antenna and try Auto scanning.
(➡ page 4, 5, 11)
• DAB station memory is full. Use the following method to clear station memory.
1. Press [DAB MENU].
2. Press [e,r, ALBUM] to select "STATION CLEAR".
3. Press [OK]. "OK? Push OK" is displayed.
4. Press [OK].
Station memory is erased and the unit automatically begins Auto scanning.
19