Panasonic Digital Palmcorder PV-GS70 Operating Instructions Manual page 41

1, 2
WB/SHUTTER
IRIS/MF/VOL/JOG
MENU
PUSH
3, 4, 5
WIPE
WIPE
WIPE
MIX
MIX
MIX
WB/SHUTTER
IRIS/MF/VOL/JOG
1, 2
MENU
PUSH
4
PHOTO
SHOT
3
MULTI/
P-IN-P
1
3
ª Wipe Mode and Mix Mode
Wipe Mode:
Like a curtain being pulled, the still picture of the last recorded scene
gradually changes to the moving image of a new scene.
Mix Mode:
While the moving image of a new scene fades in, the still image of
the last recorded scene gradually fades out.
1
Set [DIGITAL EFFECT] >> [EFFECT1] >> [WIPE] or
[MIX].
2
Exit the menu by pressing the [MENU] Button.
≥The [WIPE] or [MIX] Indication appears.
3
Press the Recording Start/Stop Button to start the
Recording.
4
Press the Recording Start/Stop Button to pause the
Recording.
≥The last scene is stored in memory. The [WIPE] or [MIX]
Indication changes to [B] or [C].
5
Press the Recording Start/Stop Button to restart the
Recording.
≥The last image of the previous scene gradually changes to the
new scene.
≥For other notes, see page 89.
ª Picture-in-Picture Mode
You can display a sub-screen (still picture) inside the screen.
After setting [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >>
[EFFECT1] >> [P-IN-P]......
1
Select [P-IN-P] on the [MULTI-PICTURES] Sub-Menu
and set the position (1234) where you want to
insert a small still picture.
2
Exit the menu by pressing the [MENU] Button.
3
4
Aim the Palmcorder at the scene you want to capture
and press the [P-IN-P] Button to insert a small still
picture.
≥A small still picture is displayed in a Normal picture.
≥If the [P-IN-P] Button is pressed again, the small still picture is
cleared.
4
Press the Recording Start/Stop Button or the
[PHOTO SHOT] Button to record on the Cassette.
≥For other notes, see page 89.
2
4
41