Preparation For Use - Sanyo DMP-P8 Instruction Manual

• Never throw batteries into a fire. Do not expose batteries to fire or
other heat sources.

Preparation For Use

UNPACKING AND SET UP
• Carefully remove all the accessories from the display carton. Verify
that you have all the necessary accessories before you dispose of
the display carton.
• Remove all packing materials from the individual components.
Remove any descriptive labels that may be attached to the front
panel of the main unit. Do not remove any labels or stickers on the
back panels of the main unit or the speakers.
• Unwind the AC power cord on the back of the unit and extend the
cord to its full length.
POWER SOURCE
• This system is designed to operate
on 240V AC 50Hz.
• Connecting this system to a power
supply that is not 240 V ~ 50 Hz
could result in damage to the unit.
• The main plug is used as the
disconnect device. The disconnect
device shall remain readily operable.
NOTE: The system has an AC plug and will only fit into matching AC
outlets. This is a safety feature to reduce the possibility of electric
shock. If the plug will not fit in your AC outlets, you should have the
outlet changed by a qualified, licensed electrician. Do not use an
adapter to make the plug fit into your outlet. This defeats the safety
feature and could expose you to electric shock.
- 4 -