Sanyo DMP-P8 Instruction Manual page 15

Operating Instructions
iii) Press MEMORY UP / DOWN button on the top panel or remote
control to select preset channel (CH 01 to CH10).
iv) Press MODE button on the top panel or remote control again to
confirm.
v) Repeat step i) to iv) to until you have memorized up to 10
stations Press MEMORY+/- button on the top panel or remote
control to listen to preset FM/AM channel CH01-CH10 at FM/AM
mode.
Note: The saved preset station will be lost if the AC Power is interrupted
and the backup battery is not inserted.
C. iPod CHARGING
If iPod is connected to the unit, iPod will charge automatically at the
following mode: STANDBY Mode, IPOD Mode, FM Radio Mode or
AUX Mode.
Note: For better AM receipt, iPod will not charge during AM Radio
Mode.
IV) AUXILIARY IN
Connect the Audio Output jacks of your auxiliary sound source (TV,
VCR, DVD Player, Cassette Deck, Mini Disc player, etc., etc.,) to the
AUX IN jack on the back panel of the unit. The auxiliary function will
only activate when the aux in jack is fitted with connection cable.
Note: The connection cables are not included.
1) Press STANDBY/SOURCE button on the top panel or remote control
to select Aux function. "AUX" will show on the top of the display.
2) Turn your auxiliary source 'On' and operate it as usual. The sound
from the auxiliary source will be heard through the speakers of this
system.
3) Adjust the VOLUME level controls of this system as desired.
V) Display Brightness Control
During POWER ON Mode, Press SNOOZE button on top panel or
remote control once to select Dimmer or Brightness display and the
SANYO Logo. This will interchange between Dimmer and Brightness
mode.
- 14 -