Video System Selection - Sanyo PLV-Z3 Owner's Manual

Video Input

Video System Selection

1
Select the AV System Menu with the Point Up/Down button,
and then press the Point Right button to enter the sub-menu.
2 Choose the system that you want to select with the Point
Up/Down button and then press the SELECT button.
Video or S-Video
Auto
The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If the projector cannot reproduce proper video image, it is necessary
to select a specific broadcast signal format among PAL, SECAM,
NTSC, NTSC 4.43, PAL-M, and PAL-N.
Component
Auto
The projector automatically detects incoming video signal, and adjusts
itself to optimize its performance.
Component Video Signal Format
If the projector cannot reproduce proper video image, it is necessary
to select a specific component video signal format among 480i, 575i,
480p, 575p, 720p, 1035i, and 1080i.
HDMI
Selected system
The projector automatically detects incoming video signal, and adjusts
itself to optimize its performance.
26
AV System Menu (Video or S-Video)
AV System Menu (Component)
AV System Menu (HDMI)