Image Level Adjustment - Sanyo PLV-Z3 Owner's Manual

Computer Input

Image Level Adjustment

1
Select the Image Adjust Menu with the Point Up/Down button,
and then press the Point Right button to enter the sub-menu.
2 Select an item with the Point Up/Down button and press the
Point Left/Right button to adjust the item.
Contrast
Press the Point Left button to decrease contrast and the Point Right
button to increase contrast. (From -31 to +31)
Brightness
Press the Point Left button to adjust image darker and the Point Right
button to adjust image brighter. (From -31 to +31)
Color temp.
Press the Point Left/Right button for Color temperature level that you
want to select. (High, Mid, Low1, Low2, Low3)
White balance (Red)
Press the Point Left button to lighten red tone and the Point Right
button to deepen red tone. (From -31 to +31)
White balance (Green)
Press the Point Left button to lighten green tone and the Point Right
button to deepen green tone. (From -31 to +31)
White balance (Blue)
Press the Point Left button to lighten blue tone and the Point Right
button to deepen blue tone. (From -31 to +31)
Sharpness
Press the Point Left button to soften the image and the Point Right
button to sharpen the image. (From -7 to +7)
Gamma
Press the Point Left/Right button to obtain better balance of contrast.
(From -7 to +7)
Direct Operation with Remote control
You can adjust the items in the Image Level Adjustment menu with
pressing the IMAGE ADJ. button on the remote control. Press Point
Left/Right button to adjust each item. Press Up/Down button to get
to the next item.
NOTE
●
After adjusting any of the White balance Red, Green or Blue, the Color
temp. will change to "User".
38
Image Adjust Menu
This arrow indicates that there
are other item menus.
Press the SELECT button or
Point Up/Down button to
adjust the next item.
Press the MENU button to
return to the previous On-
Screen Menu and store the
adjusted value. (See p38)
Go on to the next page...
MENU CANCEL
SELECT
SCREEN
IMAGE ADJ.
IMAGE ADJ. button