Table of Contents
Advertisement
r
0:00.00
R0:45
INDEX
SP
HOLIDAY
B
;
Index (p. 22)
The [INDEX] Indication flashes briefly while an
index signal is being recorded.
<
Recording Mode (p. 22, 26, 52)
AUTO:
When the Auto Mode is activated,
this indication is displayed.
MNL:
When the Manual Mode is
activated, this indication is
displayed.
Programme AE Mode (p. 42)
The Programme AE Function offers the
following settings:
5:
Sports Mode
Portrait Mode
7:
4:
Low Light Mode
Ω:
Spotlight Mode
º:
Surf & Snow Mode
=
Manual Focus (p. 26)
If you select the Manual Focus Mode, the [MF]
Indication is displayed.
Tracking Adjustment Mode (p. 32)
If you select the Tracking adjustment Mode, the
[TRACK.] Indication is displayed.
>
White Balance Mode (p. 52)
1:
When the White Balance Mode is
activated, this indication is displayed.
When the Movie Camera is in the Auto Mode,
the above indication is not displayed.
?
Colour Indication for Digital Image (p. 38)
This indication shows the colour selected for a
title that you have stored in memory.
@
Time Base Corrector (p. 31)
TBC:
When the Time Base Corrector
function is activated, this indication
is displayed.
Voice Zoom (p. 29)
V.ZOOM:
When the Voice Zoom function is
activated, this indication is
displayed.
1
;
r
R0:45
SP
<
MNL
=
MF
1
>
?
3
WHT
@
TBC
A
0LUX
2
0:00.00
r
REC
14k
R0:45
AUTO
SP
4
REC
14k
AUTO
A
0 Lux Night View Mode (p. 56)
When the 0 Lux Night View Mode is activated,
this indication is displayed.
B
Title (large indication) (p. 50)
This indication shows the selected pre-
programmed large title.
Changing the Indications
By changing the setting for [DISPLAY] on the
[DISPLAY SETUP] Sub-Menu of the [VCR
FUNCTIONS] or the [CAMERA FUNCTIONS]
Main-Menu, the Counter Display Mode can be
changed in the order shown in the above
1
4
illustrations
–
in Camera Mode, and
4
and
in VCR Mode.
1
ALL: Elapsed Tape Time Indication
(initial setting)
2
MEMORY: Memory Stop Indication and
Elapsed Tape Time Indication
(p. 69)
3
PARTIAL: No Counter Indication
Only a few indications are displayed so that all
parts of the picture can be seen clearly.
However, when you turn on the Movie Camera,
all indications initially appear for a few seconds
to inform you of the selected settings.
≥In this condition, if you switch the Movie
Camera over to the VCR Mode and then
back to the Camera Mode, [ALL] is
automatically selected for the Tape Counter
Indication.
4
OFF: No Counter Indication
In this mode, only the Operation Mode
Indications and Warning/Alarm Indications can
appear. However, when turning on the Movie
Camera, all indications appear for a few
seconds to inform you of the selected settings.
M 0:00.00
REC
14k
AUTO
REC
1, 2
71
Advertisement
Table of Contents
