Table of Contents
Advertisement
Using the Viewfinder
Before using the Viewfinder, adjust it to your eyesight
so that the indications in the Viewfinder are clear and
easy to read.
Before adjusting the Viewfinder, make sure that
the LCD Monitor is completely closed.
Never aim the Movie Camera with its
Viewfinder or Lens directly at the sun; this
could damage internal parts of the unit.
Using the LCD Monitor
It is also possible to record while viewing the picture on
the opened LCD Monitor.
Relationship between Viewfinder and LCD
Monitor
Opening the LCD Monitor turns off the Viewfinder.
Closing the LCD Monitor turns the Viewfinder on again.
However, turning the LCD Monitor forward also turns on
the Viewfinder again. (p. 26)
≥Due to limitations in production technology, there may
be some tiny bright or dark spots on the LCD,
however, these are not recorded on the tape.
20
Title
Eyepiece Corrector Lever
OFF
VCR
Procedure
1
Set the [CAMERA/OFF/
VCR] Switch to
[CAMERA] or [VCR].
Turn the switch while
1
pressing the button
.
CAMERA
OFF
VCR
1
1
Set the [CAMERA/OFF/
VCR] Switch to
[CAMERA] or [VCR].
Turn the switch while
2
pressing the button
.
CAMERA
OFF
VCR
2
CAMERA
2
If necessary, adjust the
angle of the Viewfinder
by tilting it upward.
2
Push the [3OPEN]
Lever and turn out the
LCD Monitor
approximately 90° in
the direction of the
arrow.
The Viewfinder turns off.
Advertisement
Table of Contents
