Table of Contents
Advertisement
Search Lock Function
For longer Cue or
Review Playback, press
the [5] Button or the
[6] Button only briefly.
As this locks the search
function, you do not need
to keep the button
pressed for a long time.
≥To resume normal
playback, press the [1]
Button.
Returning to the Auto Tracking Mode
Press [FOCUS/SET] Button for more than 2 seconds
during playback.
Still Playback
Press the [;] Button
during Normal Playback.
To return to Normal
Playback, press the [;]
Button again.
;W.B
;
FOCUS / SET
Remarks, etc.
≥If you leave the Movie Camera in the Still Playback
Mode for about 6 minutes, it automatically switches
over to the Stop Mode. And, if the Movie Camera is
being powered by the Battery, it switches off
completely after a further 6 minutes.
≥The sound is played back only during normal
playback.
≥In the Cue, Review and Still Playback Modes,
horizontal noise bars appear in the picture, or the
picture may become black and white or distorted.
≥The picture reproduced on the LCD Monitor contains
less noise than the picture in the Viewfinder. During
playback on a TV, however, the picture noise is the
same as in the Finder.
≥The horizontal noise bars have a different pattern in
the SP mode and LP mode.
≥During Cue or Review Playback, no indications are
displayed on the LCD Monitor.
≥The Tracking Adjustment Function is automatically
cancelled when the [TRACKING] Dial is not turned for
5 seconds.
≥It may not be possible to remove the noise bars
completely.
≥It is not possible to adjust the tracking when a menu
is displayed.
≥If you eject the cassette after adjusting the tracking,
the adjusted setting is cancelled.
33
Advertisement
Table of Contents
