Table of Contents
Advertisement
3
Press the [STORE] Button for more than 2
seconds.
The title is now stored in the digital image
memory and it remains displayed.
5
Press the [OFF/ON] Button briefly to make the
title disappear.
Pressing the [OFF/ON] Button briefly repeatedly
makes the title appear and disappear.
STORE
OFF/ON
Remarks, etc.
≥The title stored in the digital image memory may be
automatically cancelled when you store a new title.
≥The title stored in the digital image memory may be
automatically cancelled or it may be missing partially
when the Battery is removed, the AC Adaptor is
disconnected or the Battery becomes discharged.
≥By displaying the title which you stored in the digital
image memory and using the Digital Fade 1, Digital
Fade 2 or Digital Fade 3 Function, you can fade the
title together with the picture. (p. 48)
≥It is not possible to apply the Negative Effect when
storing a title in the digital image memory.
≥After turning the Movie Camera off and then on
again, the title that had been displayed in the picture
is no longer displayed. To make it appear again,
press the [OFF/ON] Button.
≥When you want to capture a small title, use the
Macro Close-up Function. (p. 29)
≥As the title picture is automatically cropped on all four
sides, aim the Movie Camera so that there is
sufficient empty space around the actual title.
≥The colours of the title change in the following order:
WHT
YEL
(White)
(Yellow)
BLK
BLU
(Black)
(Blue)
MAG
RED
(Magenta)
(Red)
GRN
CYN
(Green)
(Cyan)
39
Advertisement
Table of Contents
