Installing The Projector In Proper Position - Sanyo PDG-DXL2000 Owner's Manual

Safety Instructions
Install the projector properly. Improper installation may reduce the lamp life and cause fire hazard.
Do not roll the projector more than 10 degrees from
side to side.
10˚
10˚
Do not roll the projector more than 5 degrees from
side to side when front or rear is downward.
5˚
5˚
Do not put the projector on either side to project an
image.
CAUTION
Choose the running speed of cooling fans in the fan control setting according to the altitude in which the
projector is being used (p.61). Failure to do so may affect the projector life.
CAUTION ON CEILING MOUNTING
For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted properly,
the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty on this projector
does not cover any damage caused by use of any non-recommended ceiling mount kit or installation of the
ceiling mount kit in an improper location.
Cautious use of equipment with laser technology
Do not radiate strong light such as laser light on the projection lens directly, as this may degrade the
functionality of the projector, and will void any applicable warranties.
8

Installing the Projector in Proper Position

5˚
5˚
Note:
• Fix the projector when installing it so that the
projector would not fall down.