Menu Bar - Sanyo PDG-DXL2000 Owner's Manual

Basic Operation
For detailed functions of each menu, see "Menu Tree" on pages 72-73.
Main Menu
Input
PC adjust
Image select
Image adjust
Screen
Sound
Setting
Information
Network
Guide
24

Menu Bar

Used to select an input source from Computer 1, Computer 2, HDMI, Video or
S-video. (pp.30-31, 41-42)
Select Auto PC adj., Fine sync, Total dots, Horizontal, Vertical, Current mode and
Clamp to adjust the parameters to match with the PC input signal format. (pp.33-35)
Used to select an image mode from among Dynamic, Standard, Real, Cinema and
Image 1-4. (p.36)
For computer source, used to adjust computer image [Contrast, Brightness, Color
temp., White balance (Red/Green/Blue), Sharpness and Gamma]. (p.37)
For video or HDMI source, used to adjust picture image [Contrast, Brightness, Color,
Tint, Color temp., White balance (Red/Green/Blue), Sharpness, Gamma, Noise
reduction and Progressive]. (pp.44-45)
For computer source, used to adjust size of the image [Normal, Full, Wide (16:9), Zoom,
True, Custom, Digital zoom +/–, Keystone, Ceiling and Colorboard]. (pp.38-40)
For video or HDMI source, used to set size of image [Normal, Full, Wide (16:9), Zoom,
Custom, Keystone, Ceiling and Colorboard]. (pp.46-47)
Used to adjust the volume or mute the sound. (p.27)
Used to set the projector's operating configurations. (pp.50-62)
Display the input source information: Input, H-sync freq., V-sync freq., Screen,
Language, Lamp status, Lamp counter, Power management, Key lock, PIN code
lock, Remote control, and SERIAL NO.. (p.63)
See owner's manual of "Network Set-up and Operation".
The key operation is displayed.
Sub-Menu