Setting Up The Charging Cradle; Connecting The Charging Cradle - Siemens Gigaset C610H User Giude

First steps

Setting up the charging cradle

The charging cradle is designed for use in dry rooms in a temperature range of +5°C
to +45°C.
¤
Set up the charging cradle on a flat, non-slip surface or mount it on the wall
¢
( page 51).
Please note
Pay attention to the range of the base.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside build-
ings. The range is reduced when Eco Mode (
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.
Please note:
u
Never expose the telephone to the influence of heat sources, direct sunlight or
other electrical devices.
u
Protect your Gigaset from moisture, dust, corrosive liquids and fumes.

Connecting the charging cradle

2
To disconnect the plug from the charging cradle, press
the release button
8
1
and disconnect the plug 4.
3
¢
page 36) is activated.
¤
Connect the flat plug from the power
adapter 1.
¤
Plug the power adapter into the plug
socket 2.
4
3