This function lets you insert narration, background music or
special sound effects in previously made recordings.
However, this automatically erases the original sound in the
tape portions, on which you perform audio dubbing.
AV2 (VIDEO IN
/ AUDIO IN
Audio equipment or
Video movie camera
AV1 (VIDEO IN
/ AUDIO IN
IN (AV1) OUT
≥ Connect the audio equipment or a video movie camera to
this VCR with an audio cable.
≥ Display the VCR picture on the TV.
≥ Insert the cassette on which the audio dubbing is to be
performed, and make sure that its erasure prevention tab is
not broken out.
¡ Select the audio source required by pressing the INPUT
to set A1 or A2.
A1: Through the AV1 (AUDIO IN/VIDEO IN) sockets.
A2: Through the AV2 (AUDIO IN/VIDEO IN) sockets on
Press the Play button
search for the point from which you want to start audio
At the point from which you want to perform audio
dubbing, press the Pause/Slow button
put it in the still playback mode.
Press the A.DUB button
recording pause mode.
Start playback on the source unit
so that you can hear the sound.
When you reach the point from
which you want to start audio
dubbing, press the Pause/Slow
on this VCR again to
start recording the new sound or
start your narration.
At the point where you want to stop audio dubbing, press
the Stop button
≥ For audio dubbing with narration, you can use the built-in
microphone of the connected video movie camera.
on this VCR to start playback to
on this VCR to
on this VCR to put it in the
to finish recording.