Audio Dubbing - Panasonic NV-SJ410 Series Operating Instructions Manual

Audio Dubbing

This function lets you insert narration, background music or
special sound effects in previously made recordings.
However, this automatically erases the original sound in the
tape portions, on which you perform audio dubbing.
/I
Í
<EJECT
Audio equipment or
Video movie camera
1
2
3
A.DUB
5
A.DUB
DIRECT
TV REC A.DUB
6
Preparations
≥ Connect the audio equipment or a video movie camera to
this VCR with an audio cable.
≥ Display the VCR picture on the TV.
≥ Insert the cassette on which the audio dubbing is to be
performed, and make sure that its erasure prevention tab is
not broken out.
≥ Press the INPUT SELECT button
(external input) "A1", "A2" or "A3" according to the socket(s)
on the VCR to which you have connected the source unit.
A1: When connected to the AV1 21-pin Scart socket
A2: When connected to the AV2 21-pin Scart socket
≥ Make sure that "AV2" is set to "EXT".
(See page 36.)
A3: When connected to the Audio Input socket
front panel of this VCR
Operations
1 Press the Play button
search for the point from which you want to start audio
dubbing.
2 At the point from which you want to perform audio
dubbing, press the Pause/Still button
put it in the still playback mode.
3 Press the A.DUB button
recording pause mode.
4 Start playback on the source unit so
that you can hear the sound.
5 When you reach the point from which
you want to start audio dubbing,
press the Pause/Still button
recording the new sound or start your narration.
6 At the point where you want to stop audio dubbing,
press the Stop button
Hint:
≥ For audio dubbing with narration, you can use the built-in
microphone of the connected video movie camera.
to select the AV Input
on the
on this VCR to start playback to
on this VCR to
on this VCR to put it in the
ADUB 0:00:29
on this VCR again to start
to finish recording.
25