Using The [Playback] Mode Menu; [Calendar] - Panasonic Viera DMC-FT2 Operating Instructions Manual

[PLAYBACK] mode:

Using the [PLAYBACK] Mode menu

You can use various functions in playback mode to rotate pictures, set protection for them
etc.
•
With [TEXT STAMP], [RESIZE], [CROPPING] or [LEVELING], a new edited picture is created.
A new picture cannot be created if there is no free space on the built-in memory or the card so
we recommend checking that there is free space and then editing the picture.
You can display pictures by recording date.
Select [CALENDAR] on the [PLAYBACK] Mode menu.
•
Calendar screen can also be displayed by pressing [W] of the zoom lever a few times.
(P56)
Press 3/4/2/1 to select the date to be played
back.
•
If there were no pictures recorded during a month, the month is
not displayed.
Press [MENU/SET] to display the pictures that were
recorded on the selected date.
•
Press [‚] to return to the calendar screen.
Press 3/4/2/1 to select a picture and then press [MENU/SET].
•
The picture that was selected will appear.
Note
•
The recording date of the picture selected in the playback screen becomes the date selected
when the calendar screen is first displayed.
•
If there are multiple pictures with the same recording date, the first picture recorded on that day
is displayed.
•
You can display the calendar between January 2000 and December 2099.
•
If the date is not set in the camera, the recording date is set as the 1st January, 2010.
•
If you take pictures after setting the travel destination in [WORLD TIME], the pictures are
displayed by the dates at the travel destination in Calendar Playback.
Advanced (Playback)
¸

[CALENDAR]

- 137 -
(P32)