Panasonic Viera DMC-FT2 Operating Instructions Manual page 54

∫ Extra Optical Zoom mechanism
When you set the picture size to [
area is cropped to the centre 3M (3 million pixels) area, allowing a picture with a higher
zoom effect.
Note
•
The Digital Zoom cannot be set when õ or ¨ has been selected.
•
The indicated zoom magnification is an approximation.
•
"EZ" is an abbreviation of "Extra optical Zoom".
•
The Optical Zoom is set to Wide (1k) when the camera is turned on.
•
If you use the Zoom function after focusing on the subject, focus on the subject again.
•
When using the Digital Zoom, [STABILIZER] may not be effective.
•
When using the Digital Zoom, we recommend using a tripod and the self-timer
pictures.
•
[I.RESOLUTION] is fixed to [i.ZOOM] in following conditions.
–
Intelligent Auto Mode
–
[SPORTS]
–
[SNOW]
–
[BEACH & SURF]
¢
–
Scene Mode
–
Clipboard Mode
¢ [i.ZOOM] cannot be used when in [HIGH SENS.], [HI-SPEED BURST], [FLASH BURST] or
[PIN HOLE] in Scene Mode.
•
The Extra Optical Zoom cannot be used in the following cases.
–
In Macro Zoom Mode
–
In [TRANSFORM], [HIGH SENS.], [HI-SPEED BURST], [FLASH BURST], [PIN HOLE] or
[PHOTO FRAME] in Scene Mode
–
When recording motion pictures
•
[DIGITAL ZOOM] cannot be used in the following cases.
–
In [TRANSFORM], [HIGH SENS.], [HI-SPEED BURST], [FLASH BURST], [PIN HOLE],
[FILM GRAIN] or [PHOTO FRAME] in Scene Mode
Basic
] (3 million pixels), the 14M (14.1 million pixels) CCD
- 54 -
(P69) for taking