Troubleshooting - Panasonic Viera DMC-FT2 Operating Instructions Manual

Troubleshooting

First, try out the following procedures (P185–194).
If the problem is not resolved, it may be improved by selecting [RESET]
[SETUP] menu when taking pictures.
The camera cannot be operated even when it is turned on.
•
The battery is not inserted correctly.
•
The battery is exhausted.
The camera turns off immediately after it is turned on.
•
The battery is exhausted.
•
If you leave the camera on, the battery will be exhausted.
> Turn the camera off frequently by using the [ECONOMY] mode etc.
•
Is [AUTO POWER OFF]
> Please turn camera off and then on again.
This unit is turned off automatically.
•
If you connect to a TV compatible with VIERA Link with a HDMI mini cable (optional) and turn
off the power on the TV with the remote control for the TV, the power on this unit also turns off.
> If you are not using VIERA Link, set [VIERA Link] to [OFF].
•
Is [AUTO POWER OFF]
> Please turn camera off and then on again.
The [CHARGE] lamp flashes.
•
Is the temperature of the battery excessively high or low? If it is, it will take longer than usual to
charge the battery or charging may remain incomplete.
•
Are the terminals of the charger or battery dirty?
> Wipe off the dirt using a dry cloth.
Others
Battery and power source
(P24)
(P37) of the [ECONOMY] Mode active?
(P37) of the [ECONOMY] Mode active?
- 185 -
(P38)
(P37)
(P40)
on the