Assembly - Troy-Bilt TB45E Operator's Manual

NOTE: The only assembly required for your trimmer is to
install the debris shield and the assist handle.
EDGE GUIDE WHEEL INSTALLATION
1. Position the edge guide wheel (A) to the front of the
motor housing as shown in Fig. 1.
2. Tighten the wing nut (B) firmly. (Fig. 2)
DEBRIS SHIELD INSTALLATION
1. Position the motor housing with string head carrier
facing up. (Fig. 3)
2. Slide debris shield over motor housing.
3 Secure it with 4 screws (C). (Fig. 4)
ASSEMBLY INSTRUCTIONS
A
Fig. 1
B
Fig. 2
C
8
Fig. 3
C
Fig. 4