Maintenance Instructions - Troy-Bilt TB45E Operator's Manual

6. Lock the ends of the line in opposite slots on the spool
(Fig. 23). Place the clear plastic line retainer back over
the line and spool (Fig. 24). Pull the lower line up into
the lower slot in the clear plastic line retainer (Fig. 25).
Pull the upper line down into the upper slot (Fig. 26).

MAINTENANCE INSTRUCTIONS

Fig. 23
Fig. 24
Fig. 25
Fig. 26
7. Insert the line through each eyelet in the spool carrier
and slide the spool into the carrier. (Fig. 27)
NOTE: Insure that the line is within the clear plastic
line retainer. If it's outside of the clear plastic line
retainer, the line will not feed.
8. Make sure to insert the spring, assemble the spool
and spool carrier back onto the trimmer. To do so,
push the head on and turn it clockwise until it locks.
(Fig. 28 and Fig. 29)
13
Fig. 27
Fig. 28
Fig. 29