Table of Contents
Advertisement
5
Press and hold the power button of the transmitter for more than
about 7 seconds to enter "Pairing in process."
After about 2 seconds, the transmitter indicator will flash twice,
but keep pressing the power button.
When the transmitter indicator flashes quickly, stop pressing.
The transmitter enters "Pairing in process. "
The transmitter indicator status will vary as follows, and pairing
is established with the Bluetooth receiving device.
The transmitter indicator flashes quickly: Pairing in process
The transmitter indicator flashes when responding to the
Bluetooth receiving device: Pairing successful
The transmitter indicator flashes (at about 5-second intervals):
Connectable
Notes
"Pairing in process" of the transmitter is released after about 5 minutes. If
pairing is not established within about 5 minutes, repeat the above procedure
from step .
To enter "Pairing in process, " you need to turn off the power of the
transmitter first.
When not completed pairing
Repeat the procedure from step 2.
To quit "Pairing in process"
Press and hold the power button of the transmitter for about 2 seconds to turn off
the transmitter.
T ip
When pairing the transmitter with a number of Bluetooth receiving devices, repeat
steps 2 to 5 for each device individually.
1
Advertisement
Table of Contents
