Playing Back A Card - Panasonic NV-MX350B Operating Instructions Manual

MPEG4
PICTURE
2,
CAMERA
VCR
CARD P.B
1
MODE
ON
OFF
MENU
SHUTTER/IRIS/ VOL/JOG
PUSH
1
CARD CONTENTS
PICTURE
MPEG4
VOICE
2
100-0012
MPEG4
2
VOICE
6
PICTURE
640 640
640 640
No.25
3 4
7
42

Playing Back a Card

It plays back files recorded on a Card.
VOICE
≥When you set the Movie Camera to Card Playback Mode, the Card
Contents
moving picture and/or voice data) are recorded on the Card.
1
2
3
1
1:
3
5:
6:
∫:
;:
1, 2
When [PICTURE] is selected at step2
≥When [SLIDE SHOW] is set to [ALL], pressing [1] makes all the pictures
play back continuously.
≥When [SLIDE SHOW] is set to [PRESET], pressing [1] makes Slide Show
MULTI/P-IN-P
start.
When [MPEG4] is selected at step2
≥When the object is moving fast or zoom operation is performed, picture may
appear to be still or causes mosaic-pattern noise, but this is not a
malfunction.
When [VOICE] is selected at step2
≥If the Operation Lever is pushed towards [6] or [5] for 1 or more
seconds, it becomes 10k playback and keep pressing for 7 or more
seconds, it becomes 60k playback. Releasing the Operation Lever brings
back to normal playback.
≥When [MPEG4] or [VOICE] is selected at step 2, during playback, keep
pressing [PUSH] Dial until the volume Indication appears and turn it to
3
adjust the volume. (l 30)
4
2
Folder-File Number (When [PICTURE] or [MPEG4] is selected at step 2.)
3
Picture Size (When [PICTURE] is selected at step 2.)
4
File Number
5
Playback time (When [MPEG4] or [VOICE] is selected at step 2.)
5
To Select a Desired File and Play It Back
4
1 1 1 1
2 2 2 2
3 3 3 3
5
4
4 4 4 4
The selected file is shown on the entire screen.
640
Using File Search Mode
640
100-0012
1
2
2
≥For other notes concerning this item, see page 54.
1
are displayed to inform you which kind(s) of data (still picture,
Set the Movie Camera to Card Playback Mode.
≥The [CARD P.B] Lamp lights up.
≥The file that was recorded last on the Card is displayed.
Slide the [PICTURE/MPEG4/VOICE] Selector to desired type
of data.
Start Playback.
Playing back the File
Playing back the next File
Playing back the previous File
Stop playing back
Pause playing back (When playing back MPEG4 Data or
Voice Data, this button doesn't pause playing back within
2 seconds of finishing playing back.)
Slide the [PICTURE/MPEG4/VOICE] Selector to desired type
of data.
Press the [MULTI] Button.
≥The files recorded on the Card are displayed in Multi-Picture Mode.
Turn the [PUSH] Dial and select a desired file.
≥The selected file is marked with a frame.
≥When 7 or more files have been recorded, turn the [PUSH] Dial to
display the next file. The Operation Lever (towards [6] or [5]) can
be used instead of the [PUSH] Dial.
Press either the [PUSH] Dial or the [MULTI] Button.
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[FILE SEARCH] >> [YES].
7
≥The File search screen
Turn the [PUSH] Dial and select the desired file number, and
press the [PUSH] Dial.
appears.
6