Digital Effect Functions - Panasonic NV-MX350B Operating Instructions Manual

[EFFECT1]
2) P-IN-P
1) MULTI
3) WIPE 4) MIX
5) STROBE
6) GAINUP 7) TRACER
9) MIRROR
8) MOSAIC
[EFFECT2]
11) SEPIA
10) NEGA
13) SOLARI
12) B/W
1
MENU
SHUTTER/IRIS/ VOL/JOG
PUSH
2, 3, 4
MIX
WIPE
MIX
WIPE
MIX

Digital Effect Functions

This Movie Camera is equipped with Digital Effect Functions that add special
effects to the scene.
Digital Effects 1 [EFFECT1]
1) Multi Mode [MULTI]
2) Picture-In-Picture Mode [P-IN-P]
3) Wipe Mode [WIPE]
4) Mix Mode [MIX]
5) Strobe Mode [STROBE]
≥It records images with a stroboscopic effect.
6) Gain-up Mode [GAINUP]
≥It brightens images electronically.
≥Adjust focus manually when using this mode. (l 25)
7) Trailing Effect Mode [TRACER]
≥It records images with a trailing effect.
8) Mosaic Mode [MOSAIC]
≥It produces a mosaic-like image.
9) Mirror Mode [MIRROR]
≥The right half of an image becomes a mirror image of the left half.
Digital Effects 2 [EFFECT2]
10) Negative Mode [NEGA]
≥The colours of the recorded image are inverted as seen in a negative.
11) Sepia Mode [SEPIA]
≥It records a scene with a brownish tint, like the colour of old pictures.
12) Black&White Mode [B/W]
≥It records an image in black and white.
13) Solarisation Mode [SOLARI]
≥It records an image with a painting-like effect.
To Select a Desired Digital Effect
Set [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >> [EFFECT1] or
[EFFECT2] >> a desired Digital Effect.
To Cancel the Digital Effect
Set [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >> [EFFECT1] or
[EFFECT2] >> [OFF].
≥If the Movie Camera is turned off, the [EFFECT2] settings are cancelled.
≥For other notes concerning this item, see page 52.
Wipe Mode and Mix Mode
ª
Wipe Mode:
Like a curtain is being pulled, the still picture of the last recorded scene
gradually changes to the moving image of a new scene.
Mix Mode:
While the moving image of a new scene fades in, the still image of the last
recorded scene gradually fades out.
1
Set [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >>
[EFFECT1] >> [WIPE] or [MIX].
≥The [WIPE] or [MIX] Indication appears.
2
Press the Recording Start/Stop Button to start recording.
3
Press the Recording Start/Stop Button to pause the
recording.
≥The last scene is stored in memory. The [WIPE] or [MIX] Indication
changes to [B] or [C].
4
Press the Recording Start/Stop Button to restart the
recording.
≥The last image of the previous scene gradually changes to the new
WIPE
scene.
≥For other notes concerning this item, see page 52.
27