Panasonic NV-MX350B Operating Instructions Manual page 14

22)
23)
24)
25)
26)
27)
28)
29)
30)
31)
32)
33)
34)
35)
36)
37)
38)
39)
40)
41)
42)
43)
44)
14
[RECORDING SETUP] Sub-Menu
22) Recording Speed Mode [REC SPEED] (l 17)
23) Audio Recording Mode [AUDIO REC] (l 17)
24) Scene Index Mode [SCENEINDEX] (l 32)
25) Wind Noise Reduction [WIND CUT]
s r
26) Zoom Microphone [ZOOM MIC] (l 21)
27) Flash [FLASH] (l 26)
28) Red Eye Reduction [RED EYE REDUCTION] (l 26)
29) Flash Level [FLASH LEVEL] (l 26)
[DISPLAY SETUP] Sub-Menu
30) Date and Time Indication [DATE/TIME] (l 49)
31) Counter Display Mode [C.DISPLAY] (l 49)
32) Counter Reset [C.RESET] (l 61)
33) Display Mode [DISPLAY] (l 49)
34) LCD Lighting Mode [LCD MODE] (l 11)
35) LCD and Viewfinder Adjustment [LCD/EVF SET] (l 11)
[OTHER FUNCTIONS] Sub-Menu
36) Remote Controller Mode [REMOTE] (l 8)
37) Recording Lamp [REC LAMP] (l 18)
38) Beep Sound [BEEP SOUND] (l 50)
39) Shutter Effect [SHTR EFFECT] (l 20)
40) Date and Time Setting [CLOCK SET] (l 17)
41) Self-Recording [SELFSHOOT] (l 19)
42) Owner ID Set [OWNER ID SET] (l 49)
43) Voice Power Save [VOICE POWER SAVE] (l 54)
[DEMO MODE] Sub-Menu
44) Demonstration Mode [DEMO MODE]
≥This function reduces the sound of a wind hitting the microphone when
recording.
≥It does not work with an external microphone.
≥When it is set to [ON], directivity of microphone is regulated depending
on the strength of wind to reduce wind noise.
≥It resets the counter to zero. However, it cannot reset the Time Code.
≥If no operation takes place for approximately 10 minutes after the AC
Adaptor was connected to the Movie Camera and the [OFF/ON/MODE]
Switch was turned to [ON] without inserting a Cassette, the Movie
Camera is automatically set to Demonstration Mode for introducing its
functions. If any button is pressed or operated, the Demonstration Mode
is cancelled. The Demonstration Mode can be started by setting
[DEMO MODE] to [ON] and by exiting the Menu. To terminate the
Demonstration Mode, insert a Cassette or set the [DEMO MODE] to
[OFF].