Table of Contents
Advertisement
Speaker installation option
Attaching to a wall
You can attach all of the speakers (except subwoofer) to
a wall.
≥The wall or pillar on which the speakers are to be
attached should be capable of supporting 10 kg per
screw. Consult a qualified building contractor when
attaching the speakers to a wall. Improper attachment
may result in damage to the wall and speakers.
1 Drive a screw (not supplied) into the wall.
4.0 mm
‰
Wall or pillar
2 Fit the speaker securely onto the screw(s) with the
hole(s).
DO NOT
≥In this position, the
speaker will likely fall if
moved to the left or right.
∫ Tips
Use the measurements indicated below to identify the
screwing positions on the wall.
≥Leave at least 20 mm of space above the speaker and
10 mm on each side to allow enough space for fitting
the speaker.
Front/Surround speaker
A 17.6 mm
B 98.7 mm
C 40 mm
D 40 mm
22
At least 30 mm
7.0 mm to
‰
3 mm to 5 mm
e.g., Front speaker
DO
≥Move the speaker so
that the screw is in this
position.
Center speaker
E 16.7 mm
F 63.7 mm
G 23 mm
H 96 mm
I 26 mm
∫ To prevent speakers from falling
Front speaker, Surround speaker, Center speaker
e.g. Front speaker
Troubleshooting guide
9.4 mm
‰
Before requesting service, make the following checks. If
you are in doubt about some of the check points, or if the
solutions indicated in the following guide do not solve the
problem, consult your dealer for instructions.
Power
No power.
Insert the AC mains lead securely. (
The unit is automatically switched to standby mode.
≥The Sleep timer was working and had reached the set
time limit. (
≥This unit will automatically switch to standby mode after
30 minutes of inactivity. (
This unit is turned off when the input for the TV is
changed.
This is normal when using VIERA Link "HDAVI Control 4
or later". For details please read the operating
instructions for the TV.
Unit displays
The display is dark.
Select "Bright" in "FL Dimmer" in the Others menu.
(
19)
"NO PLAY"
≥You inserted a disc the unit cannot play; insert one it
can. (
20)
≥You inserted a blank disc.
≥You inserted a disc that has not been finalised.
"NO DISC"
≥You have not inserted a disc; insert one.
≥You have not inserted the disc correctly; insert it
correctly. (
"OVER CURRENT ERROR"
The USB device is drawing too much power. Switch to
"DVD/CD" mode, remove the USB and turn the unit off.
"F61"
Check and correct the speaker cable connections. If this
does not fix the problem, consult the dealer. (
"F76"
There is a power supply problem. Consult the dealer.
String (not supplied)
Less than
Wall
10 cm
8)
4)
4)
12)
Screw eye
(not supplied)
6)
Hide quick links:
Advertisement
Table of Contents
