Central Pneumatic 93088 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Central Pneumatic Manuals
  4. Grinder
  5. 93088
  6. Set up and operating instructions manual

Central Pneumatic 93088 Set Up And Operating Instructions Manual

1/4” air angle die grinder
Hide thumbs
Table of Contents

Advertisement

Quick Links

1/4" AIR ANGLE DIE GRINDER
SET UP AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
©
Copyright
2005, 2009 by Harbor Freight Tools
artwork contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual Revised 11h
93088
®
. All rights reserved. No portion of this manual or any

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 93088 and is the answer not in the manual?

Questions and answers

Related Manuals for Central Pneumatic 93088

Summary of Contents for Central Pneumatic 93088

  • Page 1 Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

  • Page 2: Important Safety Instructions

    SKU 93088 For technical questions, please call 1-800-444-3353. NOTICE is used to address practices not related to personal injury. CAUTION, without...

  • Page 3: Personal Safety

    Proper footing and balance enables better control of the tool in unexpected situations. SKU 93088 For technical questions, please call 1-800-444-3353. Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the applicable conditions.

  • Page 4: Air Source

    There is a risk of bursting if the tool is damaged. Use only accessories that are identified by the manufacturer for SKU 93088 For technical questions, please call 1-800-444-3353. the specific tool model. Use of an accessory not intended for use with the specific tool model, increases the risk of injury to persons.

  • Page 5: Symbols And Specific Safety Instructions

    It must be understood by the operator that common sense and caution are SKU 93088 For technical questions, please call 1-800-444-3353. factors which cannot be built into this product, but must be supplied by the operator.
  • Page 6 Do not lay the Air Angle Die Grinder down until it has come to a complete stop. Moving parts can grab the surface and pull the tool out of your control.

  • Page 7: Functional Description

    When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown throughout the manual as soon as possible. • This air tool may be shipped with a protective plug covering the air inlet.

  • Page 8: Operating Instructions

    Turn on the air compressor according to the manufacturer’s directions and allow it to build up pressure until it cycles off. SKU 93088 For technical questions, please call 1-800-444-3353. Adjust the air compressor’s output regulator so that the air output is...
  • Page 9 WARNING! Grip the Die Grinder firmly with both hands. Trip the Safety Lock (41) with your finger. Slowly apply hand pressure to SKU 93088 For technical questions, please call 1-800-444-3353. the Trigger Lever (4) until the de- sired speed is obtained.

  • Page 10: User Maintenance Instructions

    Other lubricants may damage the mechanism and may be highly flammable, causing an explosion. SKU 93088 For technical questions, please call 1-800-444-3353. Cleaning, Maintenance, and Lubrication Note: These procedures are in addition to the regular checks and maintenance explained as part of the regular operation of the air-operated tool.

  • Page 11: Troubleshooting

    3. Damaged valve or housing. 4. Dirty, worn or damaged valve. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. SKU 93088 For technical questions, please call 1-800-444-3353. Troubleshooting Likely Solutions 1. Check for loose connections and make...

  • Page 12: Parts List

    Ball Bearing Rear Plate Steel Ball Rotor Rotor Blade Cylinder Bearing Spacer Front Plate Ball Bearing Bevel Gear Cap Lock SKU 93088 For technical questions, please call 1-800-444-3353. PARTS LIST PARTS LIST Qty. Part Description Angle Housing Spindle Gear Collet...

  • Page 13: Parts Diagram

    Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 93088 For technical questions, please call 1-800-444-3353. Page 13...
  • Page 14 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents

Save PDF