Central Pneumatic 52848 Operating And Maintenance Instructions Manual

Air angle die grinder front exhaust

AIR ANGLE DIE GRINDER

FRONT EXHAUST

Operating and Maintenance Instructions

Distributed exclusively by

Harbor Freight Tools

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

artwork contained herein may be reproduced in any shape or form without the express written con-

sent of Harbor Freight Tools.

For technical questions please call 1-800-444-3353

Table of Contents

Need help?

Do you have a question about the 52848 and is the answer not in the manual?

Page 1 Harbor Freight Tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright © 2001 by Harbor Freight Tools ® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written con- sent of Harbor Freight Tools.
Page 2 Angle Die Grinder. STORE IDLE EQUIPMENT. When not in use, the Air Angle Die Grinder should be stored in a dry location to inhibit rust. Always lock up the Air Angle Die Grinder and keep out of reach of children.
Page 3 Air Angle Die Grinder was designed. Do not use a small tool or accessory to do the work of a larger industrial tool or accessory. Do not use this Air Angle Die Grinder for a purpose for which it was not intended.
Page 4: Operating Instructions
When unpacking, check to make sure all parts shown on the Parts List and Assembly Diagram are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Page 5 To clean the outside of the Air Angle Die Grinder, wipe with a clean, damp cloth and dry. If necessary, use a mild detergent. Do not immerse the Air Angle Die Grinder in liquids.
Page 6 PARTS LIST / ASSEMBLY DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. REV 07k SKU 52848 PAGE 6...