Option Setting - Panasonic NV-MV22GCS Operating Instructions Manual

Option Setting

MENU
LANGUAGE
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY 0PROG.
SELECT : , ENTER
END :MENU
1 Press [MENU] (9) to display the Main menu on the TV
screen.
2 Press [43] (28) to select [OPTION] then press
[ENTER] (26).
3 Press [43] (28) to select the desired field.
TAPE SELECT:
• Press [2 1] (28) to select the corresponding video
cassette tape length.
AUTO: The VCR automatically distinguishes E30, -60,
-90, -120, -180 and -240 tapes.
E195: For E195 tape
E260: For E260 tape
E300: For E300 tape
• The remaining tape time may not be displayed correctly
depending on the tape used.
NTSC INPUT SELECT: To select the colour TV system
• Press [2 1] (28) to select [AUTO]. Allows NTSC [4.43]
or [3.58] signals to be distinguished automatically.
• If the tape has not recorded correctly, select 4.43 or 3.58.
4.43: When recording NTSC 4.43 signals.
3.58: When recording NTSC 3.58 signals.
• Some programmes on NTSC 3.58 system cannot be
recorded correctly by selecting [3.58].
NTSC PB SELECT:
• Press [2 1] (28) to select the desired position according
to the colour TV system of the TV.
on PAL TV: For TVs that can receive PAL signals.
4.43: For TVs that can receive NTSC 4.43 signals.
3.58: For TVs that can receive NTSC 3.58 signals.
JET NAVIGATOR:
• Press [2 1] (28) to select [ON] or [OFF].
OFF: Initially set at this position.
ON: Jet Navigator function works. If you select [ON],
[OSD REC] is set to [OFF] automatically.
DELETE NAVIDATA:
• Press [2 1] (28) to select [ENTER] then press [ENTER]
(26) to do the deletion.
NO: Initially set at this position.
ENTER: It is done to delete all the Jet Navigator data.
8
LSQT0880
OPTION
TAPE SELECT [ AUTO ]
NTSC INPUT SELECT [ AUTO ]
NTSC PB SELECT onPALTV
[ ]
JET NAVIGATOR OFF
[ ]
DELETE NAVIDATA NO
[ ]
OSD REC OFF
[ ]
OSD AUTO
[ ]
SELECT: END :MENU
To select the corresponding video
cassette tape length to display the
approximate remaining tape time.
used to record NTSC signals.
To select the colour TV system of
the TV used to play back a tape
recording NTSC signals.
To set the conditions for the Jet
Navigator Function.
To delete all the Jet Navigator data
stored in the VCR memory.
OSD REC: To set the conditions for the OSD
Recording function.
• Press [2 1] (28) to select [ON] or [OFF].
OFF: Initially set at this position.
ON: This setting enables OSD Recording. (See page
10.) If you select [ON], [JET NAVIGATOR] is set
to [OFF] automatically.
OSD: To select the On Screen Display
mode.
• Press [2 1] (28) to select [AUTO] or [OFF].
AUTO: To make various indicators appear On Screen
Display for 5 seconds press [STATUS/ NAVI
CHECK] (32).
OFF: No indications appear.
4 Press [MENU] (9) twice to exit the On Screen Display.