Option Setting.14 - Panasonic NV-SJ200A Operating Instructions Manual

Option Setting
To Select the Corresponding Video
Cassette Tape Length to Display the
Approximate Remaining Tape Time
(TAPE SELECT)
1 Press the MENU button 0 to
display the Main menu on the
TV screen.
On Screen Display
2 Press the Cursor buttons (AT) 0
to select "OPTION" then press the
ENTER button 0.
3 Press the Cursor buttons (AT) 0
to select "TAPE SELECT" then
select the corresponding video
cassette tape length by pressing
the Cursor buttons (◄ ►) 0.
To Select the Colour TV System of theTV
Used to Play Back a Tape Recording NTSC
Signals
Follow steps
1
to
2
of
TAPE SELECT.
3 Press the Cursor buttons
(AT)
0
to select
"NTSC
PB
SELECr
then
select the desired position
according to the colour TV system
of the TV by pressing the Cursor
buttons (<4 1^) 0.
on PAL TV: For TVs that can receive PAL signals.
4.43: For TVs that can receive NTSC 4.43 signals.
3.58: For TVs that can receive NTSC 3.58 signals.
4 Press the MENU button 0 twice to exit the On Screen
Display.
E180: For E30, -60, -90, -120,-150 and -180 tapes.
El95: For El95 tape.
E240: For E240 tape.
E260: For E260 and -300 tapes.
• The remaining tape time may not be displayed correctly
depending on the tape used.
4 Press the MENU button 0 twice to exit the On Screen
Display.
To Select the ColourTV System of theTV
Used to Record NTSC Signals
Follow steps
1
to
2
of
TAPE SELECT.
3 Press the Cursor buttons
(A T)
0
to select "NTSC INPUT SELECT
then select "AUTO" by pressing the
Cursor buttons (◄ ►) 0.
Allows NTSC "4.43" or "3.58"
signals to be distinguished
automatically.
If the tape has not recorded
correctly, select 4.43 or 3,58.
MTsanrutaejcT
HTSCPBStLECT
NTSC CONVERTER
POWER SAVE
WRECTBEC
4.43: When recording NTSC 4.43 signals.
3.58: When recording NTSC 3.58 signals.
Some programmes on NTSC 3.58 system cannot
be recorded correctly at this position.
To Play a NTSC Game on PAL System TV
Follow steps
1
to
2
of
TAPE SELECT.
3 Press the Cursor buttons (A▼) 0
to select "NTSC CONVERTER" then
select "ON" or "OFP by pressing the
Cursor buttons (◄ ►)
0
OFF: Initially set at this position.
ON: PAL TV can receive
signals from NTSC 3.58
signal source (e.g., NTSC
game machines.)
connected to the VCR
main unit. However, when
recording, this function
does not work.
• When receiving NTSC 4.43 signals, this function does
not work correctly.
4 Press the MENU button 0 twice to exit the On Screen
Display.
4 Press the MENU button 0 twice to exit the On Screen
Display.