Option Setting - Panasonic NV-MV41 Series Operating Instructions Manual

3 Present time/Tape counter/Remaining tape time/Index
Search/OTR indication/JET Rewind
Information
Present time
Tape counter
Remaining tape time
Index Search
OTR indication
JET Rewind
4 Tape Mode/Rec Mode indicator (SP/LP/EP)
5 Cassette-in indicator
6 Colour system indicator
Any selected colour TV system except [AUTO] appears on
screen display. See pages 6 and 7.
7 NAVI CHECK indicator
During playback, press the [STATUS/ NAVI CHECK] (32)
repeatedly until the NAVI CHECK indicator appears. You
can check the property of the programme being played.
However, this function is effective only for programmes
recorded with setting the [JET NAVIGATOR] to [ON]. (See
to the right.)
Clock # Counter # Remaining Tape Time #
# NAVI CHECK indicator # Clock
• The VCR is checking the programme information while
the message [CHECKING DATA] is displayed.
• When the message [DATA NOT FOUND] appears, the
NAVI CHECK indicator cannot be displayed.
Note:
• The On Screen Display may be disturbed or disappeared
during special playback.
Display
17:24
LANGUAGE
CLOCK SET
TUNER PRESET
0:02.54
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY 0PROG.
REMAIN 2:34
SELECT
END
S 01
1 Press [MENU] (9) to display the Main menu on the TV
OTR 60
screen.
J . REW
2 Press [43] (28) to select [OPTION] then press
[ENTER] (26).
3 Press [43] (28) to select the desired field.
TAPE SELECT:
• Press [2 1] (28) to select the corresponding video
cassette tape length.
AUTO:The VCR automatically distinguishes E30, -60,
E195: For E195 tape
E260: For E260 tape
E300: For E300 tape
• The remaining tape time may not be displayed correctly
depending on the tape used.
NTSC INPUT SELECT: To select the colour TV system
• Press [2 1] (28) to select [AUTO]. Allows NTSC [4.43]
or [3.58] signals to be distinguished automatically.
• If the tape has not recorded correctly, select 4.43 or 3.58.
4.43:
3.58:
• Some programmes on NTSC 3.58 system cannot be
recorded correctly by selecting [3.58].
NTSC PB SELECT:
• Press [2 1] (28) to select the desired position according
to the colour TV system of the TV.
on PAL TV: For TVs that can receive PAL signals.
4.43:
3.58:
JET NAVIGATOR:
• Press [2 1] (28) to select [ON] or [OFF].
OFF: Initially set at this position.
ON:
DELETE NAVIDATA:
• Press [2 1] (28) to select [ENTER] then press [ENTER]
(26) to do the deletion.
NO:
ENTER: It is done to delete all the Jet Navigator data.
8

Option Setting

MENU
TAPE SELECT
NTSC INPUT SELECT
NTSC PB SELECT
JET NAVIGATOR
DELETE NAVIDATA
OSD REC
OSD
: , ENTER
SELECT:
:MENU
To select the corresponding video
cassette tape length to display the
approximate remaining tape time.
-90, -120, -180 and -240 tapes.
used to record NTSC signals.
When recording NTSC 4.43 signals.
When recording NTSC 3.58 signals.
To select the colour TV system of
the TV used to play back a tape
recording NTSC signals.
For TVs that can receive NTSC 4.43 signals.
For TVs that can receive NTSC 3.58 signals.
To set the conditions for the Jet
Navigator Function.
Jet Navigator function works. If you select [ON],
[OSD REC] is set to [OFF] automatically.
To delete all the Jet Navigator data
stored in the VCR memory.
Initially set at this position.
OPTION
[ AUTO ]
AUTO
[ ]
onPALTV
[ ]
[ OFF ]
[ NO ]
[ OFF ]
AUTO
[ ]
END :MENU