Settings Using The On Screen Display - Panasonic NV-MV22GCS Operating Instructions Manual

Time Reset Function
If the clock is less than 2 minutes slow or fast, it can easily be
reset to the proper time.
Example:
Resetting the clock to 12:00
1 Press [MENU] (9) to display the Main menu on the TV
screen.
2 Press [43] (28) to select [CLOCK SET] then press
[ENTER] (26).
3 When the current clock displays on the VCR is
between 11:58 and 12:01, press [MENU] (9) as soon as
you see the 12:00. This resets the time to 12:00.
Settings Using the On Screen
Display
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR.
To Set the Colour TV System
1 Press [MENU] (9) to display the
Main menu on the TV screen.
2 Press [43] (28) to select
[SYSTEM] then press [ENTER]
(26).
3 Press [43] (28) to select
[AUTO].
• The VCR automatically distinguishes between PAL,
SECAM/MESECAM and NTSC signals. If the picture
lacks of colour during AV external recording or playback,
set to [PAL], [MESECAM] or [NTSC].
• When you want to record or play back in black and white,
set to [B/W].
4 Press [MENU] (9) twice to exit the On Screen Display.
To Make Various Indicators Appear On
Screen Display
At a press of [STATUS/ NAVI
CHECK] (32), the following
indications appear on the TV
screen.
• Set [OSD] to [AUTO].
(See page 8.)
• The display is released
automatically after 5 seconds.
SYSTEM
AUTO
PAL
MESECAM
NTSC
B/W
SELECT:
END :MENU
1 2 3 4
CH 1 0:00.22
5
SP
PAL
6
12 / 16. [ FR ] 7
ON 20:13 CH 2 DRAMA
1 Programme position
2 Tape running display
Stop, Eject
Rewind, Review,
Index Search:,
Jet Search6,
Jet Rewind
Fast Forward, Cue,
Index Search 9,
Jet Search 5
Playback
Recording
Recording pause
Repeat playback
3 Present time/Tape counter/Remaining tape time/Index
Search/OTR indication/JET Rewind
Information
Present time
Tape counter
Remaining tape time
Index Search
OTR indication
JET Rewind
4 Tape Mode/Rec Mode indicator (SP/LP/EP)
5 Cassette-in indicator
6 Colour system indicator
Any selected colour TV system except [AUTO] appears on
screen display. See pages 6 and 7.
7 NAVI CHECK indicator
During playback, press the [STATUS/ NAVI CHECK] (32)
repeatedly until the NAVI CHECK indicator appears. You
can check the property of the programme being played.
However, this function is effective only for programmes
recorded with setting the [JET NAVIGATOR] to [ON].
(See page 8.)
Clock # Counter # Remaining Tape Time #
# NAVI CHECK indicator # Clock
• When the VCR is checking the programme data, the
message [CHECKING DATA] is displayed.
• When the programme data cannot be found, the
message [DATA NOT FOUND] appears.
Note:
• The On Screen Display may be disturbed or disappeared
during special playback.
6
5
1
¥
;¥
R1
Display
17:24
0:02.54
REMAIN 2:34
S 01
OTR 60
J . REW
7
LSQT0880