Reverse Osmosis water Supply
IMPoRtANt : The pressure of the water supply
coming out of a reverse osmosis system going to
the water inlet valve of the refrigerator needs to be
between 241 and 827 kPa.
If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the reverse osmosis system needs to
be a minimum of 276 to 414 kPa.
If the water pressure to the reverse osmosis system
is less than 276 to 414 kPa:
pARTS ANd FEATuRES
Use this page to become more familiar with the parts and features of the refrigerator.
FF Ice-Maker
dis door bins
Slide-Shelf
Cap Chute
vertical hinged
Section
Mid door bins
vegetable & Fruit
drawers
water Filter
left door bins
Tilting pocket
DA68-02649B.indd
75
Interlocking switch
light
light
•
Check to see whether the sediment filter in the
reverse osmosis system is blocked.
Replace the filter if necessary.
•
Allow the storage tank on the reverse osmosis
system to refill after heavy usage.
•
If your refrigerator has a water filter, it may
further reduce the water pressure when used
in conjunction with a reverse osmosis system.
Remove the water filter.
If you have questions about your water pressure,
call a licensed, qualified plumber.
door Closer
Cover Eva (light)
Right door bins
Tempered glass
shelves
light
Quick-Space
glass Shelf
Cover veg
light
light
Convertible Room
Auto pull Out
drawer
Freezer drawer
bin
operating _75
2012.8.30
6:41:39 PM