When closing the door, make sure the
Vertical Hinged Section is in the correct
position to avoid scratching the other door.
If the Vertical Hinged Section is reversed,
put it back to the right position and close
the door.
Moisture may appear at times on the
Vertical Hinged Section.
The door handle may become loose over
time. If this happens, tighten the bolts
found on the inside of the door.
If you close one door with a lot of force,
the other door may open.
When the door opens, the interlock switch
automatically turns off the auger motor in
the ice maker for safety reasons.
When the interior or exterior LED lamp
has gone out, please contact your service
agents.
uSINg FlEx zONE
The Flex Zone is a full-
width drawer with an
adjustable temperature
control. You can use the
Flex Zone for large party
trays, deli items, wines,
pizzas, beverages, or miscellaneous items.
There is a temperature sensor which lets you adjust
the amount of cold air allowed into the Zone.
The control buttons are located on the cap door
center.
•
Press the Temp button repeatedly until your
desired mode is lit.
•
Each time you press the Temp button, you
change the mode in this order: Meat/Fish mode
(-1 °C), Cold Drinks mode, Deli/Snack (3 °C),
Wine/Party Dishes mode.
Initially, the Cold Drinks mode is selected.
The refrigerator will adjust the temperature in
the Flex Zone automatically to the temperature
you selected.
•
The Flex Zone Temp. Display may change
depending on the number of items inside, where
they are located, the ambient temperature, and
how often the door is opened.
76_ operating