Using Several Handsets; Registering And De-Registering; Handsets; Locating A Handset ("Paging") - Siemens Gigaset C185 User Manual

Using several handsets

Using several handsets

Registering and de-registering

handsets

You can register up to six handsets with
your base station.
A Gigaset A18H handset can be registered
with up to four base stations.
Note:
The base station and supplied handsets are
pre-registered at the factory.
Registering the Gigaset A18H handset
On the handset
¢ ¢
Settings
§Menu§
¢
Register HS
q
Select the base you want to
register your handset with and
press
§OK§
been registered will be marked
by ½.
~
Enter your PIN and press
(default setting: 0000,
see page 28).
The handset will be registered.
On the base station
Within 60 seconds press and hold the reg-
istration/page key ÷ (for about 5 sec-
onds) on the base station (see page 2).
De-registering handsets
You can de-register any registered handset
from your Gigaset C185.
On a handset:
¢ ¢
Settings
§Menu§
¢
Unregister HS
~
Enter your PIN and press
(default setting: 0000,
see page 28).
24
Registration
. Bases that have
§OK§
Registration
§OK§
q
Select the handset you want to
de-register and press
Press the display key to con-
§OK§
firm deletion.

Locating a handset ("paging")

You can locate your handset using the
base station.
¤
Press the Registration/Paging key ÷
on the base station briefly.
¤
All handsets will ring at the same time
("paging"), even if the ringers are
switched off.
On individual handsets you can press
the display key
§Quiet§
tone.
Ending paging
¤
Briefly press the Registration/Paging
key on the base station ÷ or press
any key on the handset.

Changing the base station

If your handset is registered to more than
one base station, you can set it to a partic-
ular base station or to the base station
that has the best reception
¢ ¢
Settings
§Menu§
¢
Select Base
q
Select one of the registered
base stations or
press
§OK§

Making internal calls

Internal calls to other handsets registered
with the same base station or to the base
station are free.
j
Initiate internal call.
q
Select the handset or the base
station you want to call and
press
§OK§
.
§OK§
to mute the ring
(Best
Base).
Registration
and
Best Base
.
.