Table of Contents
Advertisement
2
Flip up the green levers on each side of
the white roller.
3
Wipe the scanning glass (under the
white roller) and rollers with a cotton
swab.
•
Make sure that all dirt and stains (such
as correcting fluid) are removed. Dirt
and stains will cause vertical lines on
transmitted images and copies.
If the scanning glass is difficult to clean
If you find it difficult to remove dirt from the scanning glass, you can try moistening
the swab with isopropyl alcohol or denatured alcohol. Take care that no alcohol
gets on the rollers.
4
Wipe the auto document feeder roller
on the underside of the operation panel
with a clean dry cloth.
•
Dirt on the roller may cause document
jams.
Maintenance
79
Advertisement
Table of Contents
