Programming Macros - Medion MD 80383 Manual

Univ-FB_MD80383_AUS.fm Seite 20 Dienstag, 24. Januar 2006 8:57 08

Programming macros

Using a macro, you can save a chain of commands, meaning that
several functions can be executed consecutively. You can program
three macros and store them on the number keys 1, 2 and 3.
Each macro can include up to ten key commands. A macro can
include different devices. In this way you could, for example, switch
on the TV set, the desired channel, the video recorder and the
recording function.
1. Switch the device(s) on.
2. Keep the SETUPkey pressed down for approx. 3 seconds until the
background lighting of the source key will flash for a short time
and then remain permanently lit. (Briefly pressing the SETUP key
will activate the SHIFT function.)
3. Press the MACRO key. The source key will flash briefly.
4. Press the number under which the macro should be stored, i.e.
"1", "2", or "3".
5. Press a source key (device selection, e.g. VCR) for the device
with which you would like to start (first key command).
6. Now carry out the functions that you would like to save as a
macro in the desired sequence. You may now carry out nine key
commands. The source key will extinguish briefly each time the
button is pressed.
7. To save the macro, press MACRO (the macro will be saved auto-
matically after the 10th key has been pressed). The source key
will extinguish permanently.
20