Connecting The Power Supply - Medion PC Manual

C
ONNECTING THE
Diagram reference: X, X2
Finally, connect the power supply to your PC and monitor, by
plugging the power cord into the outlet.
Observe the following safety precautions:
Please note: Even with the power switch switched off
some parts of the device receive current. You must
unplug the power plug from the socket, if you want
to interrupt the power supply to your PC or cut off your
device from current entirely.
• The power socket must be in the vicinity of the PC and
within reach of the power cables. DO NOT stretch the
power cables tightly to reach a power socket.
• In order to disconnect your PC from the power source, or set
the PC to voltage free, remove the power cord from the
socket.
• Use only the supplied power cord.
• To provide additional protection against electric shock,
power surges, lightning strikes, or other electrical damage
to your PC, we recommend the use of a surge protector.
• If you are using an extension cord, ensure that the cord
meets your local safety requirements. If in doubt, ask an
electrician.
• The power supply unit has an On/Off switch (X2) that can
be used to power off the PC. When the switch is Off no
power is being consumed.
First, read the following section to find out what you need to know
in order to get started.
P S
OWER
DO NOT Start Your PC Yet!
C
C
O O N N N N E E C C
UPPLY
T T I I N N G G
29