Sharp AR-C172M Operation Manual page 75

I I I I Standard original setting orientation
[Example 1]
Document feeder tray
Top
Bottom
[Example 2]
Document feeder tray
Bottom
* When the original is placed as shown in example 2 and stapling is to be performed, orient
the top of the original as shown below.
Document feeder tray
Top
I I I I Automatic copy image rotation - rotation copying
If the orientation of the originals and copy paper are different, the original image will be automatically rotated 90
and copied. (When an image is rotated, a message will be displayed.) If a function is selected that is not suitable
for rotation, such as enlarging the copy to greater than A4 (8-1/2" x 11") size or staple sorting with the saddle
stitch finisher, rotation will not be possible.
[Example]
Orientation of original
Face down
GThis function operates in both the auto paper select or auto image mode. (Rotation copying can be disabled
with a key operator program. See page 15 of the key operator's guide.)
Top
Top
Bottom Bottom
Orientation of paper
Document glass
Top
Bottom
Document glass
Bottom
Document glass
Top
Copy after rotation
SETTING ORIGINALS
Place originals
document feeder tray or on
the document glass so that
the top and bottom of the
original is positioned
shown in the illustration. If not,
staples will be incorrectly
positioned and some special
features may not give the
expected result.
Face down
in the
as
4
°
4-7