Sharp AR-C172M Operation Manual page 56

SADDLE STITCH FINISHER
I I I I Staple jam removal
1 Unlatch the saddle stitch finisher and slide
it away from the main unit.
Open the front cover.
2
3 Turn roller rotating knob C as shown in the
illustration until the blue indication is
seen.
Roller rotating
knob C
Blue
Remove the paper from the stapler
4
compiler.
5 If saddle stitching was selected, open the
saddle stitch section cover.
3-8
Remove the misfed paper.
6
7 Close the saddle stitch section cover.
8 Pull out the stapler section.
Turn roller rotating knob A in the direction
9
of the arrow to move the staple unit to the
front.
Roller rotating
knob A
Staple unit
Remove the staple box.
10
Be careful not to tear the
misfed paper during
removal.
Turn the roller rotating
knob until the triangle
mark is aligned with the
index.